Product Overview
DN15 to DN50
PN25
10 - 120°C
D901 - Sizes 1/2" to 2"
Inlet - Female
Outlet - BS EN 10226 formerly taper male
Inlet - Female
Outlet - BS EN 10226 formerly taper male
DZR Copper Alloy
*Please refer to Datasheet for full technical information
D901
DN15 to DN50
Flow Measurement Device (FMD) – DZR Copper Alloy
- D901 Flow Measurement Device is suitable for systems where pipes have been sized on the basis that pipe frictional losses lie in the range 100 to 400 Pa/m
- Square edged entrance orifice plates with tappings for P84 insertion style test points
- Flow measurement accuracy of ±5%