Product Overview
DN15 Only
PN25
10 - 120°C
D902 - Sizes 1/2" Inlet parallel female threads.
Outlet - Taper male threads.
Outlet - Taper male threads.
DZR Copper Alloy
*Please refer to Datasheet for full technical information
D902
DN15 Only
Ultra Low Flow Measurement Device (FMD) – DZR Copper Alloy
- D902 Flow Measurement Device (1/2″/15mm size only) is suitable for the measurement of ultra-low flows in the range 0.015 to 0.06 l/sec e.g. flows to fan coil units
- Square edged entrance orifice plates with tappings for P84 insertion style test points
- Flow measurement accuracy of ±5%